Skip to content
Place With Confidence
Position and adjust the extension precisely where you want it.
The LightFuse Method
Place the lash. Control the cure.
LightFuse brings LED curing directly to your tweezer, giving you control over exactly when and where each adhesive bond is cured.
One controlled movement
1
Place
2
Activate
3
Move On
Tweezer-Mounted LED
No separate floor lamp to reposition
Two Activation Options
Pressure sensor or hands-free foot control
Professional Education
Training and safety resources available
International Community
Used by lash artists in more than 30 countries
What Is LightFuse?
LED curing designed around the artist’s hands.
With a traditional floor-lamp system, the extension is positioned with the tweezer while the curing light remains separate. The artist may need to adjust the lamp, move the client or change their hand position to align the light.
LightFuse places the LED attachment directly on the tweezer. You position the extension first, activate the light when you are ready and cure the compatible adhesive at the point of placement.
The technology supports your technique without asking you to work
around a separate lamp.
How It Works
Three simple steps. You control every cure.
The curing step becomes part of the same precise movement you already use to place an extension.
Activate When Ready
Use the pressure sensor or hands-free foot control to activate the LED.
Cure and Move On
Cure the compatible adhesive, release the extension and continue smoothly to the next lash.
Designed for Better Control
01
02
03
04
Less equipment between you and your work.
LightFuse is designed to make LED curing feel like a natural extension of professional lash application.
Precise Placement
Adjust the extension before curing so the bond forms where you intended.
Fewer Unnecessary Movements
Keep the curing light with your tweezer instead of repeatedly repositioning a floor lamp.
A Cleaner Workspace
Reduce bulky equipment around the lash bed and preserve valuable salon floor space.
A Consistent Process
Repeat the same place, activate and cure sequence throughout the appointment.
A Different Approach
LightFuse versus a separate lamp system.
Both methods use light-compatible adhesive. The difference is how the artist positions and controls the curing light.
Workflow
LightFuse LED Tweezer
Separate Floor Lamp
Light position
LightFuse
Attached directly to the tweezer
Floor Lamp
Positioned separately from the tweezer
Activation
LightFuse
Pressure sensor or foot control
Floor Lamp
Usually controlled by a foot pedal
Repositioning
LightFuse
The light follows the artist’s tweezer
Floor Lamp
The lamp may need to be adjusted during the set
Salon footprint
LightFuse
Compact, portable system
Floor Lamp
Requires space beside the lash bed
Curing control
LightFuse
Controlled from the artist’s working hand
Floor Lamp
Controlled separately from placement
Compatible Adhesives
Choose the formula that suits your technique.
Lash Plus offers several LED-compatible adhesives with different viscosities, curing speeds and formulation options. Cure time depends on the selected adhesive and working conditions.
✓
Different curing speeds
Choose a formula appropriate for your working pace.
✓
Different viscosities
Compare thinner and more controlled consistencies.
✓
Cyano-free option available
Review the full ingredients and suitability guidance.
✓
Clear product guidance
Follow the instructions provided with each adhesive.
Professional Responsibility
New technology should come with clear guidance.
Lash Plus provides user instructions, safety information and training resources to help artists understand the device before introducing it into professional appointments.
Artists should follow the device manual, adhesive instructions, client-consultation procedures and any requirements that apply in their location.
LED curing does not guarantee that irritation or allergic reactions cannot occur. Client suitability and correct professional practice remain essential.
Common Questions
LightFuse, explained simply.
What is the LightFuse Method?
LightFuse is Lash Plus’s method of positioning an extension first and then curing compatible adhesive using a compact LED attachment mounted directly on the tweezer.
How quickly does the adhesive cure?
Cure time depends on the adhesive formula and working conditions. Compatible Lash Plus adhesives have different cure times, so always follow the instructions for the selected product.
Do I have to use the foot control?
No. The LED Tweezer can be activated using its pressure sensor or the hands-free foot control, allowing the artist to choose the method that best suits their workflow.
Can I use my preferred tweezer?
The Lash Plus attachment is designed for broad tweezer compatibility. Review the product guidance or contact support if you are unsure about a particular tweezer shape.
Will LED curing prevent adhesive allergies?
No adhesive or curing method can guarantee that irritation or allergic reactions will not occur. Artists must review product ingredients, assess client suitability and follow professional consultation and application procedures.
Is training available?
Yes. Lash Plus offers online and in-person education options. Training inclusions vary by kit and course, so review the selected product before enrolling or purchasing.
Ready to Begin?
Bring more control to every placement and every cure.
Compare Lash Plus LED systems, compatible adhesives and professional training to choose the setup that fits your work.